The wiper blade has not had washer fluid , what is the reason? Of course, this question is simply general. When we find the wiper blade has not washer fluid in the car, everyone may immediately think whether there is no water.
The first thing to check is the windshield washer fluid. Many windshield washer fluid kettles can actually be seen by opening the lid and looking directly down. Under the circumstances, if there is not because of wiper fluid, there may be other reasons, such as a broken pipe. Please pay attention, no matter the front wiper blades or the rear wiper blades, they are connected by hoses, and the place is prone to aging or aging after a long time. In the case of breakage, in this case, you can directly open the engine compartment cover and follow the glass water pipe to see if there are any water stains. The other is to look at the chassis. After spraying for a while, move the car to the front, and then check whether there is any dripping water on the ground. Case. If there is dripping water, it can be concluded that the pipe is broken. If not, then rule out the pipeline problem, depending on whether the nozzle is blocked, but this is very rare. Generally, there are two nozzles and four nozzles, and it is impossible for all of them to be blocked at the same time, and the probability of this is very low.
In addition, it depends on the motor. Is it a problem with the motor? We can let one person press the glass water spray switch, and another person goes to listen to the sound of the motor working near the motor. If there is no sound of the motor working, you can roughly judge that there is a problem with the motor. If the motor is not working, don’t rush to think that the motor is burnt out and replace the motor immediately. We must first check whether there is a problem with the motor circuit. The current car basically has a fuse in front of the motor circuit. , Take out the insurance to see if the insurance is burned out. If the fuse is burned out, this thing only costs a few cents. Buy one and plug it in and it will work.
If you need more information, please contact us by Email alicechen@xmyujin.com
