Why is the windshield wiper blade not working?

Why is the windshield wiper blade not working?

In rainy days, the car wiper will not move, or not work, can be dealt with from the following aspects:


   1. Refer to the vehicle manual to find out what type of wiper is used.


   2. Pay attention to whether the way the support rod is connected to the wiper rocker arm correctly. Some arms are screwed to the rocker arm, while others are bolted.


   3. Pull up the wiper and touch it with your finger to check whether there is any damage on the cleaned rubber refill and the elasticity of it. If the rubber ages, hardens, or cracks, the wiper blade is broken.


   4. During the test, put the wiper switch at various speed positions to check whether the wiper maintains a certain speed at different speeds. Especially in the state of intermittent work, but also pay attention to the wiper in the movement whether to maintain a certain speed.


   5. Check the wiper state and whether the wiper rod has uneven swing or leakage phenomenon of wiper. If the following three conditions occur, the wiper is unqualified.

First, swing is not smooth, the wiper is not beating properly;

Second, the surface between the rubber and glass can’t completely fit, and produce wipe residue.

Finally, the glass surface appears as a water film, and fine streaks, fog and linear residues occur on the glass after wiping.


   6. During the test, attention should be paid to whether there is abnormal noise in the motor, especially when the wiper motor "hums" and does not rotate. This indicates that the mechanical transmission part of the wiper rust dead or stuck place, at this time should immediately close the wiper switch, in order to prevent the burning of the motor.


  7. Some people believe that the longer the blade, the bigger the area and the better the view. In fact, the wiper blade is not the longer the better. Increasing the length of the wiper blade increases the visibility, but it also increases the load on the wiper motor and wiper rod. The wrong size can also cause the wipers to fail.


Kevin

Yujin Xiamen Plastic Manufacturing Co.Ltd

Add: 77, Siming Industrial Zone, Meixi Road, Xiamen,China

Tel: 0086-592-7230097           Fax: 0086-592-7230029

Email: wiper1@xmyujin.com  Cellphone: +8618900228712  

Web: www.yjwipers.com      


BAOYI makes your view more beautiful!

Subscribe to our newsletter
Website Technical support:TingYao Technology
FIND WIPERS FOR MY CAR